Nikon WR-R10 Wireless Remote Controller Software Driver and Firmware (Version 2.00) update for Microsoft Windows and Macintosh Operating Systems.
Nikon WR-R10 Software Downloads
Operating System (s) : Microsoft Windows 8, Windows 7
Operating System (s) : Microsoft Windows Vista, Windows Xp
Confirming the firmware version:
- Connect the WR-R10 to a camera
- Turn on the camera
- Press the camera’s MENU button and select Firmware version from the setup menu.
- The WR-R10’s firmware version will be displayed with a “W”.
- Turn off the camera.
Basic Download and Nikon WR-R10 Installation instructions for Windows and Macintosh:
- Windows:Create a new folder with an appropriate name on your computer’s hard drive.
- Download F-WRR10-V200W.exe to the folder created in step 1.
- Run F-WRR10-V200W.exe to create the folder named WR-R10Update containing the file WRR10_0200.bin : the firmware.
- Macintosh:Download the F-WRR10-V200M.dmg.
- Double-click the F-WRR10-V200M.dmg icon to mount the disk image titled, F-WRR10-V200M. A folder titled WR-R10Update, continaing the following file, will be created inside the disk image: WRR10_0200.bin : the frmware.
- Format a memory card with the camera and use a card reader or similar device to copy WRR10_0200.bin to the memory card.
- Format a memory card with the camera and use a card reader or similar device to copy WRR10_0200.bin to the memory card.
- Insert the memory card in camera card slot 1.
- Select Firmware version the camera’s MENU button and follow the directions displayed to upgrade the firmware.
- After the upgrade is complete, turn off the camera and WR-R10 , and remove the memory card.
- Confirm the Nikon WR-R10’s firmware has been upgraded.
User’s Manual-Windows: for firmware installation instructions
click here (English and .PDF format) and click here (Spanish and .PDF format).
Modifications/Note for Nikon DSLR WR-R10 Firmware Version 2.00:
- Camera settings can now be viewed and changed using the WR-1 when the WR-1 is used as a transmitter and the WR-R10 is connected to a D7100 for use as a receiver.Support for the Release Hold Time function built into the WR-1 is now supported when the WR-1 is used as a transmitter and the WR-R10 is used as a receiver.
Operating System (s) : Mac OS 10.1.5, Mac OS 10.2, Mac OS 10.3, Mac OS 10.4, Mac OS 10.5, Mac OS 10.6, Mac OS 10.7, Mac OS 10.8.2
- Nikon WR-R10 Mac Firmware – Download (105KB)
User’s Manual-Macintosh: for firmware installation instructions
click here (English and .PDF format) and click here (Spanish and .PDF format).
Download the software, firmware and drivers to keep your Nikon WR-R10 Wireless Remote Adapter.