Nikon D7100 Software

Nikon D7100 Digital SLR Camera Software Driver and Firmware (Version C:1.03) update for Microsoft Windows and Macintosh Operating Systems.

Nikon D7100 Software Downloads

Operating System (s) : Microsoft Windows 8.1, Windows 7, Windows Vista

Confirming the firmware version:

Turn on the Nikon D7100
Press the MENU button and select Firmware Version from the setup menu.The camera’s firmware version will be displayed.
Turn off the Nikon D7100

Basic Download and Nikon D7100 Installation instructions for Windows and Macintosh: Nikon D7100 Software for this D7100 Digital SLR Camera

Create a new folder with an appropriate name on your computer.
Choose the correct download below for the computer system you are using, and save the download to the folder created in step 1.
Run the downloaded file to create the folder titled D7100Update, containing the following file: D7100_0102.bin
Format an approved memory card in the camera, then remove.
Copy the D7100_0102.bin file to the top level of the memory card using a memory card reader or similar device, do not copy the file into any folder on the memory card.
Insert memory card into the cameras memory card slot, and switch on.
Select Firmware Version from the setup menu and follow the instructions displayed to upgrade the Nikon D7100 camera’s firmware.
DO NOT switch off the camera at any time during the update, doing so may result in the need for service.
After the upgrade is complete, trun the camera off and remove the memory card.
Check the cameras firmware version to be sure it completed.Format memory card in camera for use.

Modifications/Note for Nikon DSLR D7100 Firmware Version C:1.02:

Support for distortion control data Ver. L: 2.000 and later has been added.Camera firmware must be updated before distortion control data can be updated to Ver. L: 2.000 or later

Software:

Operating System (s) : Mac OS 10.6.8, Mac OS 10.7, Mac OS 10.8, Mac OS 10.9.4

Download the software, firmware and drivers to keep your Nikon D7100 DSLR Camera.